Payment & Shipping Terms:
|Category:||Formwork Accessory||Place Of Origin:||Yangzhou, China (Mainland)|
|Scaffolding Part Type::||Scaffolding Props||Model Number:||Shoring Props|
High Quality Adjustable Scaffold Props / Steel Proping / Trench Strut
1. Raw Material:
Q195 , Q235 ,Q345 Steel.
Push-pull prop is applied to vertically support system in the construction to support the scaffolding formwork, such as the floor construction.
Push-pull prop is mainly made up of bottom plate,outer tube, inner tube, swivel nut,cotter pin,upper plate and the accessories of folding tripod,head jack, the structure is simple and flexible.
Push-pull prop is simple of the structure, so it is easy to assemble and disassemble.
Push-pull prop is adjustable because of the outer tube and inner tube, the inner tube could extend and shrink in the outer tube, and then it could be adjusted according to the required height.
Push-pull prop could be re-used, and once useless, the material could also be recovered.
7. Practical using:
Push-pull prop could be adjusted to required height according to the different height of the constructions.
Fully & independently tested to BS4074: 1982 / BS5507-3:1982
Outer Tube: 60.3mm dia / Inner Tube: 48.3mm dia.
Finish: Painted Orange (Galvanised & Zinc Plated available upon request).
No.0 MIN 1082mm-MAX 1782mm
No.1 MIN 1842mm-MAX 3142mm
No.2 MIN 1980mm-MAX 3350mm
No.3 MIN 2572mm-MAX 3872mm
No.4 MIN 3200mm-MAX 4875mm
Contact Person: Ms. Sue